您的位置: 标准下载 » 国内标准 » GB 国标 »

GB/T 21036-2007 饲料中盐酸多巴胺的测定高效液相色谱法

作者:标准资料网 时间:2024-04-17 05:47:57  浏览:9325   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:饲料中盐酸多巴胺的测定高效液相色谱法
英文名称:Determination of dopamine hydrochloride in feeds—High performance liquid chromatography
中标分类: 农业、林业 >> 畜牧 >> 畜禽饲料与添加剂
ICS分类: 农业 >> 饲料
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2007-06-21
实施日期:2007-09-01
首发日期:2007-06-21
作废日期:
主管部门:国家标准化管理委员会
提出单位:农业部畜牧业司
归口单位:全国饲料工业标准化技术委员会
起草单位:中国农业大学、农业部兽药安全监督检验测试中心
起草人:张素霞、沈建忠、丁双阳、程林丽、江海洋
出版社:中国标准出版社
出版日期:2007-09-01
页数:8页
计划单号:20050526-T-469
适用范围

本标准规定了测定饲料中盐酸多巴胺含量的高效液相色谱法。
本标准适用于配合饲料、浓缩饲料和预混合饲料中盐酸多巴胺含量的测定。
本方法的最低检测限为0.5mg/kg,最低定量限为1.7mg/kg。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T6682 分析实验室用水规格和试验方法
GB/T14699.1 饲料 采样

所属分类: 农业 林业 畜牧 畜禽饲料与添加剂 农业 饲料
下载地址: 点击此处下载
【英文标准名称】:Samplingandtestingcarbonblackforuseintherubberindustry-Methodfordeterminationoffinescontent
【原文标准名称】:橡胶工业用炭黑取样和试验方法.料末含量测定方法
【标准号】:BS5293-3-1996
【标准状态】:现行
【国别】:英国
【发布日期】:1996-11-15
【实施或试行日期】:1996-11-15
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:炭黑;组件;含量测定;测定;精细成分;配料;材料测试;粒状炭黑;一份;橡胶;安全准备;安全规则;安全性要求;取样部分;烟灰
【英文主题词】:Carbonblack;Components;Determinationofcontent;Determinations;Finescontent;Ingredients;Materialstesting;Pelletizedcarbonblack;Portion;Rubber;Safetyprovisions;Safetyregulations;Safetyrequirements;Sampleportions;Soot
【摘要】:ThisInternationalStandardspecifiesamethodforthedeterminationofthefractionofatestportionofpellet-izedcarbonblackthatwillpassthroughasievewith125μmnominalaperturesizeunderspecifiedcon-ditions(i.e.thefinescontent).Itisapplicabletoalltypesofpelletizedcarbonblackforuseintherubberindustry.
【中国标准分类号】:G49
【国际标准分类号】:83_040_20
【页数】:8P.;A4
【正文语种】:英语


Product Code:SAE AIR4845
Title:The Fmeca Process in the Concurrent Engineering (Ce) Environment
Issuing Committee:G-11 Reliability Maint Support And Probabilistic Methods
Scope:This AIR by the G-11AT (automation and Tools) subcommittee, examines the failure mode, effects and criticality analysis (FMECA) requirements and procedures as performed on current and earlier vintage engineering programs. The subcommittee has focused on these procedures in relation to the concurrent engineering (CE) environment to determine where it may be beneficial, to both FMECA analysts and users, to automate some or all of the FMECA processes.